Description
Comet Single Compression Brass Cable Gland 38mm (1-1/2”)
The Comet Single Compression Brass Cable Gland 38mm (1-1/2”) is intended for electrical cable-entry and termination applications where a specific-size brass cable gland is required. Its complete size identification helps buyers match the product with project specifications, purchase orders and installation requirements.
The product is specified as 38mm (1-1/2”), providing both metric and inch references for easier product identification. This can be particularly useful when electrical projects, equipment documentation or procurement requirements use different measurement systems.
As a single compression brass cable gland, the product is identified by its gland type, brass construction and specified size. For electrical installation work, however, the nominal gland size should not be treated as the only compatibility factor. The actual outside diameter and construction of the cable should be checked against the manufacturer’s applicable dimensional information before ordering.
A Specific Size for a Specific Purchasing Requirement
Cable glands are available in various sizes and configurations. Clearly mentioning the complete product description on a purchase order or enquiry helps reduce confusion when multiple gland sizes are required for the same project.
For this product, the purchasing description can be written as:
Comet Single Compression Brass Cable Gland – 38mm (1-1/2”)
This identifies the key purchasing details:
- Brand: Comet
- Gland Type: Single Compression
- Material: Brass
- Size: 38mm
- Inch Equivalent: 1-1/2”
- Application: Cable entry / cable termination
This information is especially useful for contractors, panel builders, electrical procurement teams and industrial buyers handling multiple cable gland sizes.
Brass Construction
The product is identified as a brass cable gland, making it suitable for applications where metallic gland construction is specified. Brass construction provides a defined metallic option for electrical cable-entry requirements.
However, material alone does not determine whether a cable gland is suitable for a particular installation. Cable construction, actual cable diameter, thread requirement, equipment entry, environmental conditions and applicable manufacturer’s specifications should all be considered.
Buyers should therefore avoid selecting the gland solely because the 38mm designation appears close to a cable measurement. The cable’s actual dimensions should be verified before purchase and installation.
38mm and 1-1/2” Identification
The product is specified as 38mm (1-1/2”). Keeping both measurements in the product title makes identification easier when buyers work with project documents using either metric or inch measurements.
A contractor may receive a purchase requirement in millimetres, while another document may specify the inch equivalent. Showing both references allows the intended product to be identified more easily without requiring a separate conversion during procurement.
Check the Cable Before Ordering
Before purchasing the Comet Single Compression Brass Cable Gland 38mm (1-1/2”), verify the cable’s outside diameter and construction against the manufacturer’s applicable product information. The required thread and installation arrangement for the equipment, panel or enclosure should also be checked.
Where an installation has specific ingress-protection or environmental requirements, these should be verified from the applicable manufacturer’s technical documentation. Do not assume a cable diameter range, IP rating, thread specification, sealing arrangement or other engineering value unless it has been confirmed from the current manufacturer’s datasheet.
Technical Specifications
| Specification | Details |
| Brand | Comet |
| Product Type | Single Compression Brass Cable Gland |
| Size | 38mm |
| Inch Equivalent | 1-1/2” |
| Material | Brass |
| Gland Type | Single Compression |
| Application | Cable Entry / Cable Termination |
| Product Category | Cable Gland |
| Supplier | Thunderbolt Electromech India Pvt. Ltd. |
| Availability | Subject to current stock |
Technical Note: Cable diameter range, thread type, IP rating, gland dimensions, sealing details, exact brass grade and other engineering specifications should be added only after verification from the current Comet manufacturer’s datasheet or catalogue.
Applications of Comet 38mm Brass Cable Gland
The Comet Single Compression Brass Cable Gland 38mm (1-1/2”) can be considered for electrical cable-entry applications where the specified gland type, size and brass construction match the installation requirement. Potential purchasing applications include electrical panels, industrial equipment, cable-entry points, control installations and other electrical systems requiring a suitable brass cable gland.
The actual suitability depends on the cable construction, outside diameter, equipment entry, thread requirement and manufacturer’s specified operating conditions. Contractors and industrial buyers should identify the cable, check its dimensions, confirm the gland requirements and then select the matching Comet product. Thunderbolt Electromech India Pvt. Ltd. supplies electrical products for contractors, panel builders, industrial customers and project requirements. For bulk or project purchases, buyers can contact Thunderbolt for availability and quotation.
Why Buy Comet Cable Glands from Thunderbolt Electromech India Pvt. Ltd.?
Thunderbolt Electromech India Pvt. Ltd. is a Delhi-based supplier of electrical and industrial products, supplying cable glands and other electrical accessories for project and commercial requirements. Buyers requiring several cable gland sizes can provide the brand, gland type, size and quantity in their enquiry to make product identification easier.
For this product, specify:
Comet Single Compression Brass Cable Gland – 38mm (1-1/2”)
For enquiries and bulk requirements:
Phone: +91-9911886655
Email: info@thunderboltelectromech.com
Frequently Asked Questions
1. What is the size of this Comet cable gland?
This product is specified as a 38mm (1-1/2”) Comet Single Compression Brass Cable Gland.
2. What material is the Comet 38mm cable gland?
The product is identified as a brass cable gland.
3. Is this a single compression cable gland?
Yes. The product is identified as a Single Compression Brass Cable Gland.
4. Is 38mm the same as 1-1/2 inch?
The product is designated as 38mm (1-1/2”) in the product description. Buyers should use the manufacturer’s dimensional information when checking exact compatibility.
5. How do I know whether this cable gland fits my cable?
Check the actual outside diameter and construction of the cable against the manufacturer’s applicable cable-gland dimensions. The 38mm designation alone should not be used as the only compatibility check.
6. Can I order Comet cable glands for bulk requirements?
Yes. For project or bulk requirements, contact Thunderbolt Electromech India Pvt. Ltd. with the required Comet gland size, quantity and application details so availability and pricing can be confirmed.
Reviews
There are no reviews yet.