Description
Comet Single Compression Brass Cable Gland 35mm
The Comet Single Compression Brass Cable Gland 35mm (1-3/8”) is intended for buyers who require a specific-size brass cable gland for electrical cable-entry and cable termination applications. The product is identified by its complete specification: Comet brand, single compression gland type, brass construction and 35mm size with a corresponding 1-3/8 inch designation.
Using the complete product name helps contractors, panel builders and purchasing teams clearly identify the required item, especially when a project involves multiple cable gland sizes. For purchase orders and enquiries, the product can be specified as:
Comet Single Compression Brass Cable Gland – 35mm (1-3/8”)
This description identifies:
- Brand: Comet
- Product Type: Single Compression Brass Cable Gland
- Material: Brass
- Size: 35mm
- Inch Equivalent: 1-3/8”
The dual metric and inch reference can be useful when project documents, procurement specifications or customer requirements use different measurement systems. However, the nominal size alone should not be used as the only basis for product selection.
Brass Construction for Cable-Entry Applications
This product is identified as a brass cable gland intended for electrical cable-entry applications where a metallic gland construction is specified. However, brass construction alone does not confirm suitability for every installation.
Before selecting the Comet Single Compression Brass Cable Gland 35mm, buyers should verify the actual cable construction, outside diameter, required thread arrangement and equipment or enclosure entry details. Environmental conditions and other applicable installation requirements should also be checked against the manufacturer’s technical documentation.
A cable gland should not be selected simply because its nominal size appears close to the cable measurement. Correct selection depends on the actual compatibility between the cable, gland and installation arrangement.
35mm and 1-3/8” Product Identification
The product is specified as 35mm (1-3/8”). Including both measurement references makes the product easier to identify for buyers working with different purchasing documents.
For example, one project specification may use millimetres while another purchase document may refer to the corresponding inch designation. Displaying both references helps maintain consistency when identifying the required Comet cable gland.
Check Cable Compatibility Before Ordering
The most important step before purchasing is to verify the actual cable dimensions and construction against the manufacturer’s applicable technical information. Buyers should also confirm the required thread and installation arrangement for the electrical panel, equipment or enclosure where the gland will be fitted.
Where an installation has specific ingress-protection, environmental or engineering requirements, these should be confirmed from the manufacturer’s current datasheet or catalogue. Technical details such as cable diameter range, thread type, IP rating, gland dimensions, sealing details and exact material specifications should not be assumed unless verified through official manufacturer documentation.
Thunderbolt Electromech India Pvt. Ltd. supplies Comet cable glands for contractors, panel builders, industrial customers and project requirements. For bulk or project purchases, providing the complete product description, required quantity and application details can help identify the correct requirement and confirm availability.
Technical Specifications
| Specification | Details |
| Brand | Comet |
| Product Type | Single Compression Brass Cable Gland |
| Size | 35mm |
| Inch Equivalent | 1-3/8” |
| Material | Brass |
| Gland Type | Single Compression |
| Application | Cable entry / Cable termination |
| Product Category | Cable Gland |
| Supplier | Thunderbolt Electromech India Pvt. Ltd. |
| Availability | Subject to current stock |
Technical Note: Cable diameter range, thread type, IP rating, gland dimensions, sealing details, exact brass grade and other engineering specifications should be confirmed from the current Comet manufacturer’s datasheet or catalogue before final selection. This follows the same specification approach used in the reference document, which avoids adding unverified technical values.
Applications of Comet 35mm Brass Cable Gland
The Comet Single Compression Brass Cable Gland 35mm (1-3/8”) can be considered for electrical cable-entry applications where the specified gland type, size and brass construction match the installation requirement. Potential applications include electrical panels, industrial equipment, control installations, cable-entry points and other electrical systems requiring a suitable cable gland. Final suitability depends on the actual cable construction, cable dimensions, equipment entry arrangement and manufacturer’s specified conditions. Contractors and industrial buyers should identify the cable, verify its dimensions and confirm the required gland specification before selecting the matching Comet product.
Why Buy Comet Cable Glands from Thunderbolt Electromech India Pvt. Ltd.?
Thunderbolt Electromech India Pvt. Ltd. is a Delhi-based supplier of electrical and industrial products, supplying cable glands and electrical accessories for commercial, industrial and project requirements.
When purchasing multiple cable gland sizes for a project, providing the brand, gland type, size and quantity in the enquiry can help accurately identify the required products.
For this product, specify:
Comet Single Compression Brass Cable Gland – 35mm (1-3/8”)
For bulk or project requirements:
Phone: +91-9911886655
Email: info@thunderboltelectromech.com
Frequently Asked Questions
1. What is the size of this Comet cable gland?
This product is specified as a 35mm (1-3/8”) Comet Single Compression Brass Cable Gland.
2. What material is the Comet 35mm cable gland made from?
The product is identified as a brass cable gland.
3. Is this a single compression cable gland?
Yes. This product is identified as a Comet Single Compression Brass Cable Gland.
4. Is 35mm the same as 1-3/8 inch?
The product is designated as 35mm (1-3/8”) for product identification. Buyers should refer to the manufacturer’s dimensional information when checking exact compatibility.
5. How do I know whether this cable gland fits my cable?
Check the actual outside diameter and construction of the cable against the manufacturer’s applicable cable-gland dimensions. The 35mm designation alone should not be used as the only compatibility check.
6. Can I order Comet cable glands for bulk requirements?
Yes. For bulk or project requirements, contact Thunderbolt Electromech India Pvt. Ltd. with the required Comet gland size, quantity and application details so availability and pricing can be confirmed.
Reviews
There are no reviews yet.