Comet Single Compression Brass Cable Gland Size 50mm(2”)

Description

Comet Single Compression Brass Cable Gland 50mm (2”)

The Comet Single Compression Brass Cable Gland Size 50mm (2”) is intended for electrical cable-entry and termination applications where a brass construction and single compression gland type are specified. The product is identified by both its metric size, 50mm, and its inch equivalent, 2 inches, making it easier for contractors, electrical engineers, panel builders and purchasing teams to identify the required product from different project documents.

Using the complete product name during procurement can help reduce confusion when several cable gland sizes are being purchased for the same project. The recommended purchasing description is:

Comet Single Compression Brass Cable Gland – 50mm (2”)

This description identifies the key product information:

• Brand: Comet
• Gland Type: Single Compression
• Material: Brass
• Size: 50mm
• Inch Equivalent: 2”
• Application: Cable entry / cable termination

Brass Construction for Cable-Entry Applications

This Comet product is identified as a brass cable gland, making it suitable for installations where a metallic gland construction is specified. However, material and nominal gland size alone should not be treated as confirmation of compatibility. The cable construction, actual outside diameter, thread requirement, equipment entry, installation arrangement and environmental conditions should all be considered before selection.

For this reason, a 50mm gland should not be selected only because the cable measurement appears close to 50mm. The actual cable dimensions should be checked against the manufacturer’s applicable dimensional information.

50mm and 2” Size Identification

The product is specified as 50mm (2”). Providing both measurements is useful when electrical projects use different measurement conventions. One purchase document may specify the gland size in millimetres, while another may use inches.

Including both references in the product title makes the product easier to identify and helps purchasing teams specify the intended Comet gland clearly.

Check the Cable Before Ordering

Before purchasing the Comet 50mm cable gland, verify the actual outside diameter and construction of the cable against the manufacturer’s product information. The required thread and installation arrangement should also be checked for the equipment, panel, enclosure or other entry point where the gland will be installed.

Where an installation has specific ingress-protection or environmental requirements, the applicable rating and installation conditions should be confirmed from the manufacturer’s current technical documentation.

Technical values such as cable diameter range, thread type, IP rating, gland dimensions, sealing details and exact brass grade should not be assumed unless confirmed by the current Comet manufacturer’s datasheet or catalogue.

Why Buy Comet Cable Glands from Thunderbolt Electromech India Pvt. Ltd.?

Thunderbolt Electromech India Pvt. Ltd. is a Delhi-based supplier of electrical and industrial products, supplying cable glands and related electrical accessories for commercial, industrial and project requirements. Buyers can specify the required Comet gland size, quantity and application details when making an enquiry.

For projects requiring multiple cable gland sizes, providing the complete product description can help simplify product identification and quotation. For this product, specify Comet Single Compression Brass Cable Gland – 50mm (2”).

For enquiries and bulk requirements:

Phone: +91-9911886655
Email: info@thunderboltelectromech.com

Technical Specifications

Technical Note: Cable diameter range, thread type, IP rating, gland dimensions, sealing details, exact brass grade and other engineering specifications should be added only after verification from the current Comet manufacturer’s datasheet/catalogue.

Applications

The Comet Single Compression Brass Cable Gland Size 50mm (2”) can be considered for electrical cable-entry applications where the specified gland type, size and brass construction match the installation requirement. Potential purchasing applications include electrical panels, industrial equipment, cable-entry points, control installations and other electrical systems requiring a suitable brass cable gland. The actual application depends on the cable construction, equipment entry and manufacturer’s specified operating conditions. Contractors and industrial buyers should identify the cable, check its dimensions, confirm the gland requirements and select the matching Comet product accordingly. Thunderbolt Electromech India Pvt. Ltd. supplies electrical products for commercial, industrial and project requirements.

Frequently Asked Questions

1. What is the size of this Comet cable gland?

This product is specified as a 50mm (2”) Comet Single Compression Brass Cable Gland.

2. What material is the Comet 50mm cable gland?

The product is identified as a brass cable gland.

3. Is this a single compression cable gland?

Yes. The product is identified as a Single Compression Brass Cable Gland.

4. Is 50mm the same as 2 inches?

The product is designated as 50mm (2”) in the product description. Buyers should refer to the manufacturer’s dimensional information when checking exact compatibility.

5. How do I know whether this cable gland fits my cable?

Check the cable’s actual outside diameter and construction against the manufacturer’s applicable cable-gland dimensions. The 50mm designation alone should not be used as the only compatibility check.

6. Can I order Comet cable glands for bulk requirements?

Yes. For project or bulk requirements, contact Thunderbolt Electromech India Pvt. Ltd. with the required Comet gland size, quantity and application details so availability and pricing can be confirmed.