Description
“The 28mm TCT Fast Hole Saw is the professional’s choice for challenging metalwork. While traditional bi-metal saws often overheat and seize when drilling thick stainless steel or cast iron, our Carbide-tipped system uses perimeter-cutting technology to slice through material with 50% less effort.
This cutter features an integrated safety flange (stop collar) to prevent over-penetration, making it safe for use on electrical enclosures and thin-walled panels. Whether you are a steel erector, a commercial electrician, or a marine fabricator, the 28mm Fast Cutter ensures your holes are perfectly round and ready for assembly without the need for secondary filing or deburring.”
The Power of “Kerf-Only” Cutting
A standard 28mm twist drill bit must pulverize the entire volume of the hole, requiring immense power and generating massive heat. The 28mm Fast Hole Saw only cuts the outer rim (the kerf). This results in:
-
3x Faster Cutting Speed: Finish a hole in seconds, not minutes.
-
Battery Longevity: Cordless drills can perform up to 40% more holes per charge.
-
Tool Life: Lower friction means the bit stays sharp for hundreds of holes.
Material Versatility: From Wood to Stainless Steel
Modern 2025 construction uses a mix of composite materials and high-grade alloys. TCT technology allows a single 28mm cutter to transition from stainless steel plates to fiberglass or hardwood without dulling, reducing the number of specialized tools a technician needs to carry on-site.
Comparison & Technical Charts
Performance Comparison: 28mm Hole Saw Types
| Feature | TCT Fast Cutter | Bi-Metal (M42) | Step Drill Bit |
| Material Limit | Stainless, Cast Iron, Alloy | Mild Steel, Wood, PVC | Thin Sheets Only ($<3\text{mm}$) |
| Heat Resistance | Ultra-High ($1000^\circ\text{C}$) | High ($600^\circ\text{C}$) | Moderate |
| Hole Quality | Precision/Mirror Finish | Moderate/Standard | Clean (on thin sheet) |
| Durability | 500+ Holes | 100-150 Holes | 50-80 Holes |
| Ease of Use | High (Pilot Guided) | Moderate (Arbor required) | High (No pilot needed) |
Recommended RPM Chart (28mm Cutter)
To ensure tool longevity, always operate at the following speeds:
| Material | Recommended RPM | Coolant Required? |
| Stainless Steel (304/316) | 300 – 450 RPM | Yes (Cutting Oil) |
| Mild Steel | 500 – 800 RPM | Recommended |
| Aluminum | 1000 – 1200 RPM | No |
| Cast Iron | 350 – 500 RPM | No (Dry) |
| Hardwood / PVC | 1500 – 1800 RPM | No |
Reviews
There are no reviews yet.